Microstructural development during crystallization firing of a dental-grade nanostructured lithia-zirconia glass-ceramic

The microstructural development during crystallization firing of a commercially-available dental-grade nanostructured lithia-zirconia glass-ceramic (Vita Suprinity® PC) was unraveled using a wide battery of ex-situ and in-situ characterization techniques. It was found that the milling blocks are slightly crystallized glass-ceramics, with a complex chemical composition and consisting of partially de-polymerized glass plus lithium silicate (Li₂SiO₃) nanocrystals. It was also found that during crystallization firing the glassy matrix first reacts with part of the Li₂SiO₃ to form lithium disilicate (Li₂Si₂O₅) at ～810?820 °C, and then lithium orthophosphate (Li₃PO₄) precipitates from the glass. This results in glass-ceramics with abundant nanocrystals embedded in a sparse zirconosilicate glass matrix (containing many other cations subsumed) that, due to its high viscosity, inhibited crystal growth. Therefore, these dental glass-ceramics are not reinforced with zirconia (ZrO₂) crystals unless over-fired above ～890 °C and at the expense of its singular nanostructure. Finally, this study opens doors for optimizing the clinical performance of these dental glass-ceramics via microstructural tailoring.     

An Improved Protocol for Agrobacterium-Mediated Transformation in Subterranean Clover (Trifolium subterraneum L.)

Subterranean clover (Trifolium subterraneum) is the most widely grown annual pasture legume in southern Australia. With the advent of advanced sequencing and genome editing technologies, a simple and efficient gene transfer protocol mediated by Agrobacterium tumefaciens was developed to overcome the hurdle of genetic manipulation in subterranean clover. In vitro tissue culture and Agrobacterium transformation play a central role in testing the link between specific genes and agronomic traits. In this paper, we investigate a variety of factors affecting the transformation in subterranean clover to increase the transformation efficiency. In vitro culture was optimised by including cefotaxime during seed sterilisation and testing the best antibiotic concentration to select recombinant explants. The concentrations for the combination of antibiotics obtained were as follows: 40 mg L⁻¹ hygromycin, 100 mg L⁻¹ kanamycin and 200 mg L⁻¹ cefotaxime. Additionally, 200 mg L⁻¹ cefotaxime increased shoot regeneration by two-fold. Different plant hormone combinations were tested to analyse the best rooting media. Roots were obtained in a medium supplemented with 1.2 µM IAA. Plasmid pH35 containing a hygromycin-resistant gene and GUS gene was inoculated into the explants with Agrobacterium tumefaciens strain AGL0 for transformation. Overall, the transformation efficiency was improved from the 1% previously reported to 5.2%, tested at explant level with Cefotaxime showing a positive effect on shooting regeneration. Other variables in addition to antibiotic and hormone combinations such as bacterial OD, time of infection and incubation temperature may be further tested to enhance the transformation even more. This improved transformation study presents an opportunity to increase the feeding value, persistence, and nutritive value of the key Australian pasture.     

Preliminary Studies on Furfural Production from Lignocellulosics

This study focused on the production of furfural from agricultural and industrial biomass residues by a hydrodistillation process. Corncobs, sugarcane bagasse, and eucalypt wood were treated with sulfuric, hydrochloric, and phosphoric acids as catalysts, with different acid concentrations (1.5 to 5.2 mol.L ^?1). In addition, the eucalypt liquor from the auto-hydrolysis, kraft-dissolving pulp production process was also investigated as a source of furfural, using sulfuric and hydrochloric acids as a catalyst (0.9 and 3.9 mol.L ^?1) . Furfural yields of 30.2, 25.8, and 13.9% were achieved for corncob, sugarcane bagasse, and eucalypt wood, respectively, on the basis of biomass dry weight. The efficiency of conversion from pentose to furfural using eucalypt liquor from the auto-hydrolysis kraft process was 71.5% using HCl 3.9 mol.L ^?1 . Due to the presence of a high amount of pentose, corncob produced the highest amount of furfural, followed by sugarcane bagasse and then eucalypt wood.     

Effects of chelates on plants and soil microbial community: comparison of EDTA and EDDS for lead phytoextraction

Most studies on chelate-induced phytoextraction have focused on EDTA-mediated Pb phytoextraction. But EDTA and the formed EDTA-Pb complexes have low biodegradability and high solubility in soil, resulting in an elevated risk of adverse environmental effects. EDDS is an easily biodegradable chelating agent that has recently been proposed as an environmentally sound alternative to EDTA. Consequently, a greenhouse experiment, using a completely randomized factorial design with four replications, was carried out to compare the potential of EDTA and EDDS for chelate-induced Pb phytoextraction with Cynara cardunculus, as well as to investigate the toxicity of these two chelates to both cardoon plants and soil microorganisms. The effects of chelate addition on soil microbial communities were studied through the determination of a variety of biological indicators of soil quality such as soil enzyme activities, basal and substrate-induced respiration, potentially mineralizable nitrogen, and community level physiological profiles. EDTA was much more efficient than EDDS for the enhancement of root Pb uptake and root-to-shoot Pb translocation. In a soil polluted with 5000 mg Pb kg(-1), as a result of the addition of 1 g EDTA kg(-1) soil, a value of 1332 mg Pb kg(-1) DW shoot was obtained. EDDS application resulted in a shoot Pb accumulation of only 310 mg kg(-1)DW. Plants treated with EDDS showed lower values of biomass than those treated with EDTA. EDDS proved to be rapidly degraded, and less toxic to the soil microbial community in control non-polluted soils. Pb-polluted EDDS-treated soils showed significantly higher values of basal and substrate-induced respiration than those treated with EDTA. Although EDDS had a lower capacity to enhance Pb phytoextraction than EDTA, it has the advantage of rapid biodegradation.     

Aflatoxin and PAH exposure biomarkers in a U.S. population with a high incidence of hepatocellular carcinoma

The incidence of hepatocellular carcinoma (HCC) is significantly elevated in a Hispanic community in Bexar County, Texas. Chronic exposure to dietary aflatoxins (AFs) is a major risk factor for HCC; increased risk has been linked to polycyclic aromatic hydrocarbon (PAH) co-exposure and hepatitis virus infection. The aims of this study were to assess AF and PAH exposures, investigate dietary factors that may contribute to increased AF exposure, and determine the prevalence of hepatitis virus infection in Bexar Co. Blood and urine samples were collected from 184 volunteers for biomarker analyses and hepatitis screening. Serum AFB₁-lysine adduct, urinary AFM₁ and 1-hydroxypyrene (1-OHP) levels were measured using high-performance liquid chromatography. The average AFB₁-lysine adduct level detected in 20.6% of serums was 3.84 ± 3.11 pg/mg albumin (range 1.01-16.57 pg/mg). AFM₁ was detected in 11.7% of urines, averaging 223.85 ± 250.56 pg/mg creatinine (range 1.89-935.49 pg/mg). AFM₁ detection was associated with increased consumption of corn tortillas (p = 0.009), nuts (p = 0.033) and rice (p = 0.037). A significant difference was observed between mean 1-OHP values of non-smokers (0.07 ± 0.13) and smokers (0.80 ± 0.68) μmol/mol creatinine (p < 0.01). A high hepatitis C virus positivity rate (7.1%) was observed. Findings suggest that the incidence and level of AF and PAH exposure were less than those observed in a high-risk population; however, participants consuming higher amounts of foods prone to AF contamination may be more vulnerable to exposure and interactions with other environmental/biological factors (i.e., HCV).     

Trace metals in the marine bivalve Macoma balthica in the westerschelde estuary, The Nertherlands. Part 3: Variability of the role of cytosol in metal uptake by the clams

Tellinid clams Macoma balthica were sampled every 2 months for 2.5 years at two locations from the Westerschelde estuary (The Netherlands) and submitted to in vitro short-term exposure to Cd, Cu and Zn. Total and heat-stable cytosolic metal concentrations have been measured before and after exposure to study the effects of the sampling season on metal uptake by the bivalve. We observed much higher uptakes of Cd and, to a lesser extent, Cu in winter than in summer, while Zn appears to be constantly regulated. These phenomena are amplified in the cytosol, especially for Cd, a non-essential element, for which the concentrations after exposure can reach 35–45 μg·g⁻¹ (dry wt.) in winter, but only a maximum of 0.5 μg·g⁻¹ in summer, all natural values being between 0.01 and 0.1 μg·g⁻¹ on average. The contents (μg) of the various elements, either at the total or at the cytosolic level, are not constant, hence showing that the seasonal body weight fluctuation of the clams (dilution or concentration effect) is not the only parameter responsible for the metal uptake variability. Furthermore, we have shown that the proportion of cytosolic metal is not constant, but increases with the absolute cytosolic concentration up to 35–40. Therefore, the cytosolic phase of the cells plays a growing role in Cd, Cu and Zn storage as long as their total concentration increases.     

Evaluation of UV/H2O2 treatment for the oxidation of pharmaceuticals in wastewater

Advanced oxidation treatment using low pressure UV light coupled with hydrogen peroxide (UV/H₂O₂) was evaluated for the oxidation of six pharmaceuticals in three wastewater effluents. The removal of these six pharmaceuticals (meprobamate, carbamazepine, dilantin, atenolol, primidone and trimethoprim) varied between no observed removal and >90%. The role of the water quality (i.e., alkalinity, nitrite, and specifically effluent organic matter (EfOM)) on hydroxyl radical (OH) exposure was evaluated and used to explain the differences in pharmaceutical removal between the three wastewaters. Results indicated that the efficacy of UV/H₂O₂ treatment for the removal of pharmaceuticals from wastewater was a function of not only the concentration of EfOM but also its inherent reactivity towards OH. The removal of pharmaceuticals also correlated with reductions in ultraviolet absorbance at 254 nm (UV₂₅₄), which offers utilities a surrogate to assess pharmaceutical removal efficiency during UV/H₂O₂ treatment.     

Homogeneous iron-catalyzed photochemical degradation of muconic acid in water

Iron photochemical oxidation has been used to remove muconic acid from water. Two different light systems were used: black lamps and solar irradiation. The effect of iron concentration, intensity of incident radiation, pH and presence of oxalic acid was investigated. The first two variables yield positive effects on the removal rate of muconic acid while higher efficiency was achieved at pH 3. Oxalic acid enhances the oxidation rate because of the formation of photoactive ferrioxalate ion. Stoichiometric results indicated formation of two hydroxyl radicals to degrade 1 mol of muconic acid. At similar experimental conditions, initial oxidation rates of muconic acid were higher when solar light was used to irradiate the aqueous solutions, although in this case, the oxidation process is stopped because of the consumption of photoactive species.     

Influence of added concrete compressive strength on adhesion to an existing concrete substrate

An experimental study was performed to evaluate the bond strength between two concrete layers of different ages, considering different mixtures of added concrete, with different strengths. The specimens first had the roughness of the substrate surface increased by sand blasting. Later, the new concrete was added. Afterwards, slant shear tests were performed to quantify the bond strength in shear. These tests indicated that increasing the compressive strength of the added concrete relative to the compressive strength of the substrate concrete improves the bond strength and changes the rupture mode from adhesive to monolithic. A finite element analysis showed that, increasing the difference between the compressive strengths of the added concrete and the substrate concrete, higher values of normal stress are present in the interface, for the same level of shear stress. The study presented in this paper reveals that the added concrete, normally with higher compressive strength than the substrate concrete, may possibly have an influence on concrete-to-concrete bond strength. Therefore, design of shear at the interface between concrete cast at different ages, according to Eurocode 2, could be improved, since here only the lowest strength concrete is considered.